Furnaces

What is a furnace? Simply put, a furnace draws air in from the living space, heats it up and returns it to warm the home. Modern furnaces are forced air systems in three basic configurations based on the direction in which the furnace outputs heat:

1. Upflow furnaces
An upflow furnace takes cool air in from the bottom and discharges it from the top. Upflow furnaces are generally placed in a home's basement.
A gravity furnace is a type of upflow furnace that does not use a blower motor, instead using physics: The heated air rises through ducts and cooled air sinks through return vents. Gravity furnaces are incredibly efficient but don’t provide the immediate gratification of blower units.

2. Horizontal flow (or cross-flow) furnaces
A horizontal furnace lies on its side, pulling cool air from one side and pushing warm air out of the other.
Horizontal furnaces are often used in locations where there is limited space and may be found in a crawl space or a closet.

3. Downflow furnaces
In this configuration, the furnace takes cool air from the top and discharges warm air from the bottom.
Downflow furnaces are generally found in homes with no basement and are usually placed in an attic.

Choosing a configuration. The biggest consideration in choosing among these configurations is your home's layout. If you have no basement or crawlspace, an upflow furnace is not an option.

Because hot air naturally rises and cold air sinks, upflow furnaces have to perform less work and tend to have longer life spans than the other configurations.

The hot air in an upflow furnace will dissipate its stored air quickly because the air rises out of the unit on its own, whereas in horizontal flow and downflow furnaces, the unit doesn't cool down as fast so they incur more wear. That’s something to think about if you’re building a new home. Another thing to consider is the heat source.

Furnace fuel options. Most furnaces use gas—either natural gas or propane. The gas enters a chamber, is ignited by the pilot and warms the air within a heat exchange chamber. The air is blown into the living space through heating ductwork and the exhaust gases are vented out of the home. Electric furnaces use heating elements, or strips, to warm the air instead of a fossil fuel source. Everything else works the same way.

Maintaining your furnace. As with all HVAC systems, air filtration is critical to effective heating. Make sure you change or clean your furnace filters often and have your furnace professionally serviced before every heating season.

Contact A-TEAM Heating & Air Conditioning today at (888) 433-9413 for a free estimate on a furnace or your heating system in general!



Testimonials

ATEAM We would like to thank you for the quick response to my call and for servicing my air conditioning when we were all in melt down mode. Your service technicians were very professional and polite and we will recommend you guys to everyone in the future. Thanks again.
~R & S Kennedy, Pittsgrove NJ

Quick Contact